How To Clean An Electric Shaver? (10 Simple Steps)

GoodElectricShaver is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Last Updated on October 6, 2022 by Danish M

An electric shaver is a device that is used to remove hair from the face, neck, and other areas. It is important for people who use an electric shaver to regularly maintain it in order to keep it in good working condition.

What can happen if you don’t clean your electric razor?

It is important to clean your electric razor regularly to avoid any hair clogs. Hair clogs are the most common issue that electric shavers face. The buildup of hair can cause the blades to become dull and the motor will start making a buzzing sound. This can cause skin irritation, tugging, and pulling of the hair that can result in getting ingrown hair.  

How To Clean An Electric Shaver

How often you must clean your electric razor?

Electric razors must get a quick cleaning right after every use. However, deep clean your electric razor at least once a week, or it depends on how often you use it. This will help keep it running smoothly and in top condition.

Tips and Tricks on How To Clean Your Electric Shaver The Right Way

Whether you prefer wet shaving or dry shaving, you must take care of your electric shaver properly. Here are some ways to ensure that your electric shaver lasts longer.

I prefer a waterproof electric razor since it’s quite easy to clean and maintain it, you can safely clean it under running tap water. 

If your shaver is not waterproof then you need to clean it dry using a small brush that comes with the shaver which can be a real hassle for some users.   

Before we begin,  the electric razor must be powered off and it must not be connected to the power outlet. 

How to Disassemble and Reassemble an Electric Shaver for a Deep Cleaning Session

If you are looking for a way to clean your shaver, I have the perfect solution for you. I will show you how to disassemble and reassemble your electric razor so that it is in tip-top shape. I will show you the best way to clean an electric shaver. You will learn how to disassemble and reassemble an electric shaver so that it is in top shape.

1. Remove the head of the shaver to access all of its components. Remember to clean each part separately and if you don’t know how to do it, take it in for maintenance.

2. The 2nd thing you should do is remove the blades from your shaver and then either rinse them off in water or use the cleaning brush that came with your razor to remove any hairs that are stuck in between the blades.

3. Use a cleaning brush or q-tip to remove all of the hairs from the base. Make sure to get them all from around the head and under it.

4. To clean up your shaver, you can use a soft brush. Gently brush the blades to remove hair and make sure that the blade is being rotated. For better cleaning, you can use a soapy solution for thorough cleaning.

5. Now that you have removed all of the hair, give the blades a quick rinse with warm water and a bit of soap, and make sure there are no traces of dirt left on them.

6. If your shaver is fully waterproof, you can clean your shaver under running water and make sure to clean any hair out of all of its crevices. If you are using a brush, then dip it in some water and lightly scrub away any hairs stuck on the blade’s head. Keeping the razor’s head clean is crucial. 

7. For basic cleaning, try this option: pour ½ teaspoon of mild dish soap or liquid soap into your electric shaver cup and run the power on the shaver for about 5-10 seconds.

Then rinse with water for about 30 seconds, or until the water runs clear. You can also shake off excess water from the razor and let the parts air dry completely. This way the foils and blades are thoroughly cleaned.

8. It’s quite important to fully dry all the parts of the shaver before reassembling it. Gently pat dry your shaver by using a clean piece of cloth, then allow it to fully air dry.

9. Reassemble your electric shaver by carefully putting all of the parts back together.

10. Don’t forget to lubricate your shaver after you’re finished cleaning up your shaver, and enjoy your clean shaver.  

Common Pitfalls to Avoid When Cleaning an Electric Shaver

Cleaning your electric shaver is an important step to maintaining your electric shaver and the blades.

There are a few common pitfalls that you need to avoid when cleaning your electric shaver.

1. The first pitfall is leaving the shaver plugged in while it’s being cleaned. This can lead to an electrical shock or fire hazard, so it’s important that you unplug the device before beginning the cleaning process.

2. The second pitfall is using water when cleaning a shaver that is not waterproof. The water can get into the motor and damage it, so make sure that you only use a small brush to clean your non-waterproof electric shaver.

An electric shaver that’s not waterproof has a few minor mechanisms that can be damaged by using soap or water while cleaning. It is best to use a spray cleaner to clean the non-waterproof electric razor.

3. Lastly, If you clean your waterproof shaver using soap and water, you need to dry it off properly. Don’t dry off your electric shaver with a hairdryer or clothes dryer after washing it off.

The shaver should only be cleaned as instructed by the manufacturer, and the cleaning process should only involve a small brush and not vigorous rubbing or boiling.


There are many ways in which you can clean your electric shavers. Choose the option that is right for you. With a little effort and following the above guidelines it should be easy to keep your shaver in good shape.

Danish M

I really enjoy grooming and styling which leads to my passion for reviewing electric shavers and trimmers. I love the latest innovation and advancement in the shaving world that makes the grooming and beard shaving really safe and easy. Read More

We will be happy to hear your thoughts

Leave a reply

Good Electric Shaver
error: Alert: Content is protected !!